Check of the measurement results
1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
[Speaker Config. Check]
3
CH SEL
ENTER
(Remote control unit)
4
CH SEL
ENTER
(Remote control unit)
5
CH SEL
ENTER
(Remote control unit)
26
Select the items.
The measurement results of each item can be
checked here.
CH SEL
ENTER
(Main unit)
Press the ENTER button and display
the verification screen.
CH SEL
ENTER
(Main unit)
If the check ends, press the ENTER button again.
CH SEL
ENTER
(Main unit)
Select from the following three items based on the
measurement results.
CH SEL
• Set with the checked measurement value.
ENTER
• Perform the measurement again.
• Cancel the checked measurement value.
(Main unit)
When the "Store" is selected, all parameters are
stored up .
When the "Retry" is selected, it measures again.
CH SEL
ENTER
(Main unit)
NOTE:
• When measurements have been made using the
measurement microphone, speakers with a built-
in filter such as subwoofers might be set with a
value that differs from the physical distance
because of the internal electrical delay.
[Delay Time Check]
[Channel Level Check]