Denon AVR-3805 Operating Instructions Manual page 21

3.Input Setup
Input Setup
Digital In This assigns the digital input jacks for the different input
1
Assignment sources.
Ext. In
2
Subwoofer Set the Ext. In Subwoofer terminal playback level.
Level
Component This assigns the color difference (component) video input jacks for
3
In Assign the different input sources.
Video Input
4
Set the input signal to be output from the monitor output terminal.
Mode
Auto Tuner
5
FM stations are received automatically and stored in the memory.
Presets
4.Advanced Playback
Advanced Playback
Set the audio delay to delay time the sound and synchronize it with
1
Audio Delay
the picture.
Dolby Digital Turn the audio compression on or off when down-mixing Dolby
2
Setup Digital signals.
Auto Surround
3
Set the Auto surround mode function.
Mode
5.Option Setup
Option Setup
Power AMP Set this to switch the surround back channel's power amplifier for
1
Assignment use for zone2 or zone3.
This sets the output level the zone2 output jacks.
Zone2 vol.
2
This menu is not displayed, when "ZONE2" is selected at Option
Level
Setup "Power Amp Assign".
Trigger Out1
3
Set the Trigger Out1 output for the each input sources.
Setup
Trigger Out2
4
Set the Trigger Out2 output for the each input sources.
Setup
5
Muting Level This sets the amount of attenuation at audio output muting.
This sets whether or not to display the on-screen display that
On Screen appears on the monitor screen when the controls on the remote
6
Display control unit or main unit are operated.
A setting to prevent flickering.
Set whether or not to lock the system setup settings so that they
7
Setup Lock
cannot be changed.
NOTES:
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor
is connected to both the AVR-3805's S-Video and video monitor output jacks and signals are input to the AVR-3805 from a video source (VDP, etc.) connected to
both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-Video monitor output. If you wish to output the signals to
the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 49.)
• The AVR-3805's on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with small
screens or low resolutions.
• The setup menu is not displayed when headphone are being used.
Input
CD DVD VDP
source
Digital
COAX1 COAX2 OPT1
Inputs
DVD VDP TV
VIDEO1 NONE VIDEO2
A1 ~ A8 87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
B1 ~B8 520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz
C1 ~C8 90.1 MHz
D1 ~D8 90.1 MHz
E1 ~E8 90.1 MHz
F1 ~F8 90.1 MHz
G1 ~G8 90.1 MHz
PHONO CD TUNER CDR/TAPE
OFF OFF OFF
PHONO CD TUNER CDR/TAPE
ON ON ON
Default settings
TV DBS V. AUX VCR-1
OFF OPT2 OPT5 OPT3
Subwoofer = +15 dB
DBS VCR-1 VCR-2 V. AUX
VIDEO3 NONE NONE NONE
AUTO
Default settings
0 ms
OFF
Auto Surround Mode = ON
Default settings
Surround Back
Variable
ZONE=MAIN
DVD VDP TV DBS
OFF ON ON ON ON
ZONE=2
DVD VDP TV DBS
ON ON ON ON ON
---dB(minimum)
On Screen Display = ON / Mode 1
Setup Lock = OFF
VCR-2 CDR/TAPE
OFF OPT4
— —
— —
VCR-1 VCR-2 V. AUX
ON ON ON
VCR-1 VCR-2 V. AUX
ON ON ON
21