Connecting The Video Components - Denon AVR-3805 Operating Instructions Manual

Connecting the video components

• To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in video quality.
• When making connections, also refer to the operating instructions of the other components.
• The AVR-3805 is equipped with a function for up-converting video signals.
• The signal connected to the video signal terminal is output to the S-Video and component video monitor out terminals.
• The REC OUT terminals have no conversion function, so when recording only connect the video terminals.
TV or DBS tuner
AUDIO
VIDEO
B
OUT
R L OUT
R L
AUDIO
VIDEO
OUT
R L OUT
L
R
R L R L
R L R L OUT
OUT IN
VIDEO
AUDIO
R L R L
R L R L OUT
OUT IN
VIDEO
AUDIO
Connecting a video decks
• There are two sets of video deck (VCR) jacks, so two video decks can be connected for simultaneous recording or video copying.
Video input/output connections:
• Connect the video deck's video output jack (VIDEO OUT) to the
(yellow) VCR-1 OUT jack using 75 Ω/ohms video coaxial pin plug cords.
Connecting the audio output jacks
• Connect the video deck's audio output jacks (AUDIO OUT) to the
OUT jacks using pin plug cords.
Connect the second video deck to the VCR-2 jacks in the same way.
8
Connecting a TV or DBS tuner
TV or DBS
• Connect the TV's or DBS tuner's video output jack (VIDEO OUTPUT) to the
(yellow) TV or DBS IN jack using a 75 Ω/ohms video coaxial pin
VIDEO
plug cord.
• Connect the TV's or DBS tuner's audio output jacks (AUDIO OUTPUT) to
the AUDIO
B
Connecting a DVD player or a video disc player (VDP)
DVD
• Connect the video disc player's video output jack (VIDEO OUTPUT) to the
jack using a 75 Ω/ohms video coaxial pin plug cord.
• Connect the video disc player's analog audio output jacks (ANALOG AUDIO OUTPUT) to the
AUDIO DVD IN jacks using pin plug cords.
• VDP can be connected to the VDP jacks in the same way.
R
L
R
L
L
R
R
L
R L
R L
Video deck 2
IN
Video deck 1
IN
TV or DBS IN jacks using pin plug cords.
DVD player or video disc player (VDP), etc.
VIDEO
IN
MONITOR OUT
• Connect the TV's video input jack (VIDEO INPUT) to the
MONITOR OUT jack using a 75 Ω/ohms video coaxial pin plug
cord.
VIDEO (yellow) VCR-1 IN jack, and the video deck's video input jack (VIDEO IN) to the
VCR-1 IN jacks, and the video deck's audio input jacks (AUDIO IN) to the
AUDIO
(yellow) DVD IN
VIDEO
Monitor TV
Note on connecting the digital input jacks
• Only audio signals are inputs to the digital input jacks.
For details. (See page 7)
VIDEO
VIDEO
VCR-1
AUDIO