5-1 Setting the Power Amplifier Assignment
Make this setting to switch the power amplifier for the surround back channel to ZONE2 or ZONE3.
If ZONE2/3 is selected, the signal that selected at ZONE2/3 is output at "SURR. BACK/MULTI ZONE PREOUT" terminals.
1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
3
CH SEL
ENTER
(Remote control unit)
When "Surround Back" is selected
4
CH SEL
ENTER
(Remote control unit)
5-2 Setting the Zone2 vol. Level
Set the Zone2 pre-out output level adjustment.
1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
Select "Power Amp Assignment" at the Option
Setup Menu.
CH SEL
ENTER
(Main unit)
Press the ENTER button.
Display the Power Amp Assign screen.
CH SEL
ENTER
(Main unit)
Select "Surround Back" to use as the surround back
channel, "Zone2" to use as Zone2 out, Zone3 to use as
Zone3 out.
CH SEL
ENTER
(Main unit)
Enter the setting.
CH SEL
The Option Setup Menu reappear.
ENTER
(Main unit)
At the Option Setup Menu select "Zone2 vol.Level".
CH SEL
ENTER
(Main unit)
Display the Zone2 vol. Level screen.
CH SEL
ENTER
(Main unit)
When "Zone2" is selected
When "Zone3" is selected
45