Preparations; Turning The Power; Selecting The Input Source; Setting The Input Mode - Denon DHT-589BA Owner's Manual

Playback
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
SOURCE SELECT
<SOURCE>
<POWER><INPUT MODE>
<ON/STANDBY>
[Front]
[ON/SOURCE]
[OFF]
[QUICK SELECT]
SOURCE SELECT

Preparations

BUTTON
Turning the Power On
<BUTTON>
[BUTTON]
1
<POWER>
Press .
The power indicator lights red and the power is set to the standby
mode.
2
<ON/STANDBY>
Press
The power indicator flashes green and the power turns on.
[SOURCE SELECT]
b Also press
turns on. In this case the input source is selected by remote
control unit.
[QUICK SELECT]
b Also press
turns on. In this case Quick Select is selected by remote control
unit (vpage 41).
Turning the Power Off
<ON/STANDBY>
q Press or
The power is set to the standby mode.
[Rear]
<POWER>
w Press .
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when traveling, either press
SOURCE
or unplug the power cord from the power outlet.
SELECT

Selecting the Input Source

Select the source using
[INPUT]
<SOURCE SELECT>
Turn
between input sources.
If "Rec Select" is selected for the input source, press
<SOURCE SELECT>
before turning
[ON/SOURCE].
or
[Selectable items]
when in standby mode, the power
when in standby mode, the power
[OFF]
.
• When a digital signal is properly input, the "
• The surround mode cannot be set if the input mode is set to "EXT.
• Only set "PCM" and "DTS" when playing the respective signals.
<POWER>
to turn off the power,
SOURCE SELECT
.
[SOURCE SELECT]
or press to switch
<SOURCE>
.

Setting the Input Mode

Set the input mode for this source.
<INPUT MODE> [INPUT]
Press or .
Each time you press the button, the input mode display will change.
Auto PCM
EXT. IN Analog
Auto
: Detect type of digital input signal and decode and play
automatically.
PCM
: Decode and play only PCM input signals.
DTS
: Decode and play only DTS input signals.
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
on the display. If the " " indicator does not light, check the
digital input connector assignment and the connections.
IN".
ENGLISH
DTS
" indicator lights