Denon AVR-3805 Operating Instructions Manual page 12

Connecting the MULTI ZONE jacks
For instructions on operations using the MULTI ZONE FUNCTIONS. (See page 69 ~ 71)
[1] ZONE 2 preout CONNECTIONS
• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 preout (variable/fixed level) jacks can be used to play a
different program source in ZONE2 the same time. (See page 71)
• The ZONE2 video out is only for the ZONE2.
[2] ZONE 3 FIXEDOUT CONNECTIONS
• If another pre-main (integrated) amplifier is connected, the ZONE3 Fixed-OUT jacks can be used to play a different program source in ZONE3
the same time. (See page 71)
R
12
Power amplifier
Extension jacks for future use.
CONTROL terminal
Perform the following operation before using an external controller connected to the RS--232C terminal:
1. Press the ON/STANDBY button on the main unit and set the unit to the operating mode.
2. Perform the operation to turn off the power from the external control.
3. Check that the product has been set to the standby mode.
After checking the above, check the connections of the external controller. Operation is possible.
Pre-main amplifier
B
L
Extension jacks for future use.
ZONE2
RC-617
OUTPUT INPUT
INFRARED SENSOR
+
L
R
ZONE3
RC-617
OUTPUT INPUT
INFRARED SENSOR
+
RC-616
INFRARED
RETRANSMITTER
+
AUX OUT
RC-616
INFRARED
RETRANSMITTER
+
AUX OUT