Denon Link Connections - Denon AVR-3805 Operating Instructions Manual

DENON LINK connections

High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold DENON LINK compatible DVD
Player.
2 Playback using the DENON Link connector
Digital transfer and multi-channel playback of DVD audio discs and other multi-channel sources is possible by connecting the AVR-3805 to a
Denon DVD player equipped with a DENON LINK connector using the connection cable included with the DVD player.
2 DENON LINK Setting
When a DENON DVD player and the DENON LINK have been connected, be sure to make a setting to "DENON LINK" with the System Setup
Digital In Assignment. (See page 39)
• Select the input for the playback of signals that cannot be transferred by DENON LINK.
• When the input mode is AUTO and DENON LINK has become unlocked, the unit automatically changes over to the set connector (ANALOG
or EXT. IN).
1
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Remote control unit)
14
Select the digital input jack to be assigned to the input
source.
CH SEL q Select input source.
ENTER
(Main unit)
w Select input jack.
CH SEL
ENTER
(Main unit)
q Select DLINK setting.
CH SEL
ENTER
(Main unit)
w Select input signal.
CH SEL
ENTER
(Main unit)