Port Mapping Commands - HP P4518A - Traffic Management Server Sa7150 User Manual

C H A P T E R 5
Port Mapping
Commands
Command
create block
delete block
show block
88
HP e-Commerce/XML Server Accelerator SA7150 User Guide
These commands are used to execute the operations described in
Chapter 3's Mapping and Blocking sections.
Definition
Create a block to preclude access to specified IP addresses or
through specified ports. A single IP, a single port, or all ports can
be blocked. If fewer than all ports are to be blocked, you must
repeat the create block command for each one.
Example:
HP SA7150> create block
Client IP to block [0.0.0.0]: 10.1.2.1
Client IP mask [0.0.0.0]: 255.255.0.0
Server IP to block [0.0.0.0]: 20.1.2.1
Server IP mask [0.0.0.0]: 255.255.0.0
Server Port to block: 80
Server Port mask [0xffff]:
HP SA7150>
Delete a block specified by index number. Use show block (see
below) to correlate existing blocks with their numbers.
Example:
HP SA7150> delete block 1
Display all existing blocks.
Example:
HP SA7150> show block
--------
blocks :
---------
(1) block 10.1.2.1 255.255.0.0 20.1.2.1
255.255.0.0 80 0xffff
----------