Alarms And Monitoring Commands - HP P4518A - Traffic Management Server Sa7150 User Manual

C H A P T E R 5
Alarms and
Monitoring
Commands
Command
set alarms
show alarms
set rsc_window
100
HP e-Commerce/XML Server Accelerator SA7150 User Guide
Description
Enable all or a selection of the SA7150's alarms.
Syntax:
HP SA7150>
set alarms <all esc nls none ovl rsc
utl>
where
<all> enables all five of the SA7150's alarms
<esc> enables the Encryption Status Change Alarm
<nls> enables the Network Link Status Alarm
<none> disables all alarms
<ovl> enables the Overload Alarm
<rsc> enables the Refused SSL Connection Alarm
<utl> enables the Utilization Threshold Alarm
Example:
HP SA7150>
set alarms all
HP SA7150>
show alarms
Alarms set: esc rsc utl ovl nls
Display the list of currently enabled alarms.
Example:
HP SA7150>
set alarms none
HP SA7150>
show alarms
Alarms set:
NOTE: When no alarms are set (i.e., when none is specified in set
alarms), the display shows an empty field.
Set interval (window) at which the device checks for refused SSL
connections and, if any are detected, issues an RSC Alarm.
(Range: 5-65000 seconds, default: 15)
Syntax:
HP SA7150>
set rsc_window <sec>
where <sec> is the number of seconds of the desired interval.