Accessing The Command Prompt - HP P4518A - Traffic Management Server Sa7150 User Manual

C H A P T E R 2
Accessing the
Command
Prompt
NOTE: The password is
not echoed on the
command line.
Physical Installation
After the SA7150 boots up, the password prompt appears.
1. Type admin at the password prompt and press Enter to access
the prompt:
Password: admin (password is not echoed at prompt)
Current date: 2000 11/01 05:01
HP SA7150>
You are now ready for operations at the Command Line Interface
(CLI) of the SA7150. The following is a typical way to begin:
2. Change your password from admin to another of your choice.
Use the password command.
HP SA7150> password
3. Use set date to correct the date/time, if necessary. The date
and time affect the validity of the certificate.
HP SA7150> set date
4. Use the help command to list available command (or refer to the
Command Reference in Chapter 5 of the User Guide).
HP SA7150> help
5. Configure XML servers and patterns as appropriate for your
business needs. (See Chapter 3 of the User Guide for details.)
6. If your operational model includes SSL traffic, configure the
appropriate keys and certificates. (See Chapter 3 of the User
Guide for details.)
13