Chapter 9: Troubleshooting - HP P4518A - Traffic Management Server Sa7150 User Manual

Item Symptom
Server and/or
1
Network LEDs not
illuminated.
Troubleshooting
Probable
Cause
Unit is in
•
Bypass mode.
Improper
•
cabling.
Remedy
If the Inline LED is not illuminated
•
(solid or blinking) take the SA7150
out of Bypass mode by either
pressing the Bypass switch on the
unit's front panel or using the CLI's
inline command.
Depending on what type of
•
equipment the SA7150 is connected
to, either straight-through or
crossover Cat-5 network cables are
required for both Network and
Server ports. Switch out the
different cable types at each port
until both Network and Server LEDs
are illuminated.