Monitoring; Monitoring Reports; Console Configuration; Report Configuration - HP P4518A - Traffic Management Server Sa7150 User Manual

C H A P T E R 7

Monitoring

Monitoring
Reports
Console
Configuration
Report
Configuration
142
HP e-Commerce/XML Server Accelerator SA7150 User Guide
A monitoring report is one line of user-configurable text displayed at
the console at a user-configurable interval of between five and 65000
seconds. The interval default is 15 seconds.
Monitoring reports are disabled by default, and are enabled with the
CLI set monitoring command. (See Chapter 5.) The monitoring
application is aware of the port on which the enable command arrives,
and accordingly sends reports to that same port, thus monitoring
reports are displayed on the same console from which the feature is
enabled.
You can specify the fields to be displayed in each report. Reports
begin with the letter "M" (for monitor report, to distinguish them
from alarm reports) and the timestamp. The other fields available are
user-selectable via a CLI command (see "CLI Commands" below in
this section). The standard default fields are mode, failmode, CPU,
SSLCS, and OVR. Monitor reports are disabled by default.
Monitor report format:
M:mm/dd/yyyy hh:mm:ss:
mode:failmode:CPU;i,k,a:SSLCS;c,m,t:OVR;r,c,
m,t:
NetIF;s:SvrIF;s:BES;c,m,t;BDS;c,m,t:TOTCPS;c
,m,t;XMLCPS;c,m,t:XML;p,m,n
Where:
M Monitor report
yyyymmddhhmmss Timestamp
mode Bypass mode status [INLINE|BYPASS]
failmode Fail mode status [SAFE|THRU]
CPU;i,k,a CPU%; (i)dle, (k)ernel,
(a)pplication
SSLCS;c,m,t SSL Connections per Second;
(c)urrent, (m)ax, (t)otal
OVR;r,c,m,t Overload events; (r)esponse
[SPIL|THRT], (c)urrent, (m)ax,
(t)otal