Appendix B: Failure/Bypass Modes - HP P4518A - Traffic Management Server Sa7150 User Manual

WARNING: Enabling
bypass mode will
instantly terminate all
active remote
management sessions.
Failure/Bypass Modes
The HP e-Commerce/XML Server Accelerator SA7150 is designed
with the ability to automatically bypass e-Commerce traffic in the
event of a failure. If necessary, the user can force a bypass with the
bypass button or from the command line interface using the bypass
command. There is also a security feature (Fail-through switch). In
the default Fail-safe position, this switch prevents traffic from
passing through unprocessed in the event of a failure or if bypass
mode is manually activated.
The following discussion about the bypass button and Fail-through
switch assumes that normal conditions for SA7150 processing are in
effect (i.e., the user has entered the appropriate CLI commands to
enable SA7150 processing).