Monitoring Reports Cli Commands - HP P4518A - Traffic Management Server Sa7150 User Manual

C H A P T E R 7 Monitoring
NetIF;s Net interface; (s)tatus
[NC|10HDX|10FDX|100HDX|100FDX]
SvrIF;s Svr interface; (s)tatus
[NC|10HDX|10FDX|100HDX|100FDX]
BES;c,m,t Bytes Encrypted per Second;
(c)urrent, (m)ax, (t)otal
BDS;c,m,t Bytes Decrypted per Second;
(c)urrent, (m)ax, (t)otal
TOTCS;c,.m.t Total connections per second;
(c)urrent, (m)ax, (t)otal
XMLCS;c,m,t XML connections per second;
(c)urrent, (m)ax, (t)otal
XML; p,m,n XML request information;
(p)arsed, (m)alformed, (n)o-matching-server

Monitoring Reports CLI Commands

Below are the CLI commands for console monitoring, with defaults
and ranges where applicable:
set monitoring_interval <seconds> (Range: 5-
65000; Default: 15 )
show monitoring_interval
set monitoring_fields <fields> (Range: all,
mode, failmode, cpu, cps, ovrld, link, enc,
dec, totcps, xmlcps, xml; Default: mode,
failmode, cpu, cps, ovrld, totcps, xmlcps,
xml)
show monitoring_fields
set monitoring enable|disable (Default:
disable)
show monitoring
Examples:
HP SA7150> set monitoring_interval 15
HP SA7150> show monitoring_interval
Monitoring report interval [secs]: 15
HP SA7150> set monitoring disable
HP SA7150> show monitoring
143