Enabling Snmp; Specifying Snmp Information - HP P4518A - Traffic Management Server Sa7150 User Manual

C H A P T E R 6
Enabling
SNMP
126
HP e-Commerce/XML Server Accelerator SA7150 User Guide
sslOverloadThrottles
Connections were throttled in the past
sslOverloadInterval
appRestartAlert
SSL processing application has restarted
Enabling and disabling SNMP is accomplished with the CLI
command, setsnmp snmp enable|disable. Operational status can be
verified using showsnmp snmp.
Examples:
HP SA7150> setsnmp snmp enable
HP SA7150> showsnmp snmp
SNMP: enable
HP SA7150> setsnmp snmp disable
HP SA7150> showsnmp snmp
SNMP: disable

Specifying SNMP Information

Configurable SNMP parameters can be set collectively using the
setsnmp snmp_info command as illustrated below:
HP SA7150> setsnmp snmp_info
SNMP Port
SNMP Trap Port
Contact Person
System Location [" "]: Palo Alto
System Name
Current values of SNMP parameters are displayed using the
shownmp snmp_info command:
HP SA7150> showsnmp snmp_info
SNMP Port Number
SNMP Trap Port Number: 162
SNMP System Contact
SNMP System Name
SNMP System Location : "Palo Alto"
System IP Address
System Netmask
Default Route
[161]:
[162]:
[" "]: support
[" "]: SA7150
: 161
: "support"
: "SA7150"
: 1.2.3.4
: 2.3.4.5
: None