Hardware Installations and Upgrades
2. Release the drive carrier handle, by depressing the latch in the handle (see letter "A"
in the following figure). Slide the drive carrier into the drive bay (see letter "B").
Continue to push firmly until the handle fully engages and closes (see letter "C"). A
click should be heard as the latch engages and holds the handle closed. Press in on
both sides of the drive (see letter "D") to ensure the drive is seated properly and makes
a good connection with the backplane. Secure the drive carrier to the chassis by
tightening the screw on the front of the drive carrier a half a turn with a #10 TORX*
screwdriver (see letter "E"). This prevents inadvertent removal of the hard drive.
3. Install the appropriate drive label on the indent to the right side of the drive carrier.
See
Important: Ensure that the carrier is orientated so that the drive is uppermost and the handle opens
from the left.
C
64
Figure 92
for drive bay numbering order.
D
Figure 74. Installing Drive Carrier into Drive Bay
B
E
Intel® Storage System SSR212CC User Guide
A
TP01832