Replacing A Pci Riser Connector Card; Figure 28. Removing Pci Riser Connector Card From Pci Riser Assembly - Intel SSR212CC User Manual

Hardware Installations and Upgrades

Replacing a PCI Riser Connector Card

A PCI riser connector card can be replaced if it fails or if a different option is required.
Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system.
1. Observe all safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the enclosure cover. For instructions, see
on page
5. Remove the PCI riser assembly. For instructions, see
Assembly" on page
6. Remove any installed Intel® RAID Controller SCRS28X cards. For instructions, see
"Removing an Intel® RAID Controller" on page
7. Remove the four screws securing the old PCI riser connector card to the PCI riser
assembly (see letter "A" in the following figure). Detach the old PCI riser connector
card from the PCI riser assembly (see letter "B").

Figure 28. Removing PCI Riser Connector Card from PCI Riser Assembly

28
14.
22.
Appendix D, "Safety
"Removing the Enclosure Cover"
"Removing the PCI Riser
30.
B
A
TP02063
Intel® Storage System SSR212CC User Guide
Information".