Intel SSR212MA Install Manual
Rail kit installation
Hide thumbs
Also See for SSR212MA:
- Install manual (20 pages) ,
- Configuration manual (10 pages) ,
- Technical product specification (52 pages)
Related Manuals for Intel SSR212MA
Summary of Contents for Intel SSR212MA
- Page 1 Rail Kit Install Guide: Intel® Storage System SSR212MA ® A Guide for Technically Qualified Assemblers of Intel Identified Subassemblies/ Products Intel Order Number: D23739-001...
- Page 2 Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining applications or for any other application in which the failure of the Intel product could create a situation where personal injury or death may occur.
-
Page 3: Safety Information
Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the ® Intel Server Deployment Toolkit CD and/or at http://support.intel.com/support/ motherboards/server/sb/cs-010770.htm. -
Page 4: Warnings
Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. Rail Kit Install Guide: Intel® Storage System SSR212MA... -
Page 5: Table Of Contents
Rail Kit Installation Instructions ....................1 Prepare System .......................... 1 Prepare Right Inner Rails ......................2 Prepare Left Inner Rails ......................3 Prepare Rack ..........................3 Install System in Rack ........................ 5 Complete Setup .......................... 5 Rail Kit Install Guide: Intel® Storage System SSR212MA... - Page 6 Rail Kit Install Guide: Intel® Storage System SSR212MA...
- Page 7 List of Figures Figure 1. Preparing Right Inner Rail................... 2 Figure 2. Preparing Left Inner Rail ..................... 3 Figure 3. Attaching Outer Rail to Rack..................4 Figure 4. Securing System to Rack.................... 5 Rail Kit Install Guide: Intel® Storage System SSR212MA...
- Page 8 Rail Kit Install Guide: Intel® Storage System SSR212MA...
-
Page 9: Rail Kit Install Guide
Rail Kit Install Guide The Intel® Storage System SSR212MA chassis is designed to be installed in cabinets that are 19 in (483 mm) wide by up to 36 in (914 mm) deep. A set of rack mounting rails is provided in this kit and will accommodate either square or round hole rack-mounting methods. -
Page 10: Prepare Right Inner Rails
Caution: Before performing any maintenance on the system, back up the data. Follow the instructions in the Intel® Storage System SSR212MA Software User Manual for shutting down the system. 2. Turn off all peripheral devices connected to the storage system. Turn off the storage system. -
Page 11: Prepare Left Inner Rails
“C”) of the outer rail to the rack using four screws and washers. The screws should be left loose enough to allow sideways movement of the outer rail in the rack slots. d. With a Phillips screwdriver, tighten the clamping screws (see letter “D”). Rail Kit Install Guide: Intel® Storage System SSR212MA... -
Page 12: Figure 3. Attaching Outer Rail To Rack
Left-side View of Rail Assembly Installed into Rack TP02028 Figure 3. Attaching Outer Rail to Rack Rail Kit Install Guide: Intel® Storage System SSR212MA... -
Page 13: Install System In Rack
(see letter “A” in the following figure). TP02029 Figure 4. Securing System to Rack Complete Setup 14. Re-connect all peripheral devices and the AC power cable(s). Power up the storage system. Rail Kit Install Guide: Intel® Storage System SSR212MA... - Page 14 Rail Kit Install Guide: Intel® Storage System SSR212MA...