Figure 80. Connecting Cables To Server Board - Intel SSR212CC User Manual

4. Connect the main power cable to the server board (see letter "A" in the following
figure). Connect the IPMB cable (see letter "B"). Connect the P3 power supply signal
cable (see letter "C"). Connect the reset (see letter "D") and power switch (see letter
"E") cables.
D
E
5. Install the IMM Pro module. For instructions, see
on page
6. Install the PCI riser assembly. For instructions, see
Assembly" on page
7. Install the processor air duct. For instructions, see
on page
8. Install the cooling module. For instructions, see
page
9. Install the enclosure cover. For instructions, see
page
10. Re-connect all peripheral devices and the AC power cable.
Intel® Storage System SSR212CC User Guide
B
C

Figure 80. Connecting Cables to Server Board

98.
25.
73.
54.
16.
Hardware Installations and Upgrades
A
"Installing the IMM Pro Module"
"Installing the PCI Riser
"Installing the Processor Air Duct"
"Installing the Cooling Module" on
"Installing the Enclosure Cover" on
TP02010
71