Figure 95. Connecting P4 Power Supply Cable To Backplane; Figure 96. Drive Bay Numbering Order - Intel SSR212CC User Manual

Hardware Installations and Upgrades
14. Ensure the P4 power supply cable is properly connected to the backplane connector.

Figure 95. Connecting P4 Power Supply Cable to Backplane

15. Install the PCI riser assembly into the new chassis. For instructions, see
PCI Riser Assembly" on page
16. Install the processor air duct over the processor on the server board. For instructions,
see
17. Install the cooling module into the new chassis. For instructions, see
Cooling Module" on page
18. Install the enclosure cover. For instructions, see
page
19. Install all drive carriers into the chassis. For instructions, see
Carrier" on page
20. Re-connect all peripheral devices and the AC power cable. Power up the storage
system.
84
"Installing the Processor Air Duct" on page
16.
63. Ensure that all drive carriers are installed in the proper order.
1 2
5 6
9 10

Figure 96. Drive Bay Numbering Order

TP02036
25.
73.
54.
"Installing the Enclosure Cover" on
3
7
11
Intel® Storage System SSR212CC User Guide
"Installing the
"Installing the
"Installing a Drive
4
8
12
TP01831