Setting The Vpn Firewall's Mac Address; Manually Configuring Your Internet Connection - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

4. Set up the traffic meter for WAN 1 ISP if desired. See
27.
Note: At this point of the configuration process, you are now connected to the
Internet through WAN port 1. But you must continue with the configuration
process to get the complete functionality of the dual WAN interface.
The configure the WAN2 ISP settings:
1. Repeat the above steps to set up the parameters for WAN2 ISP. Start by selecting the WAN2
ISP Settings tab. Next click Auto Detect on the WAN2 ISP Settings screen and then verify
the connection by clicking the WAN Status link.
2. Set up the traffic meter for WAN2 ISP, if desired. See
27.

Setting the VPN Firewall's MAC Address

Each computer or router on your network has a unique 48-bit local Ethernet address. This is also
referred to as the computer's MAC (Media Access Control) address. The default is set to Use
Default Address. If your ISP requires MAC authentication and another MAC address has been
previously registered with your ISP, then you must enter that address. Setting the VPN firewall's
MAC address is controlled through the Advanced options on the WAN1 ISP Settings and WAN2
ISP Settings screen (see"Configuring the Advanced WAN Options (Optional)" on page

Manually Configuring Your Internet Connection

If you know your ISP connection type, you can bypass the Auto Detect feature and connect your
VPN firewall manually. Ensure that you have all of the relevant connection information such as IP
Addresses, account information, type of ISP connection, etc., before you begin. Unless your ISP
automatically assigns your configuration automatically via DHCP, you will need the configuration
parameters from your ISP (see
Note: To enable a WAN port to respond to a Ping from the Internet, use the Rules menu
(Figure 4-2 on page
To manually configure your WAN1 ISP Settings:
1. Does your Internet connection require a login? If you need to enter login information every
time you connect to the Internet through your ISP, select Yes. Otherwise, select No.
Connecting the VPN Firewall to the Internet
ProSafe VPN Firewall 200 FVX538 Reference Manual
Figure 2-1 on page 2-3).
4-9).
v1.0, January 2010
"Enabling the Traffic Meter" on page 6-
"Enabling the Traffic Meter" on page 6-
2-16).
2-5