NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 30

ProSafe VPN Firewall 200 FVX538 Reference Manual
When Auto Detect successfully detects an active Internet service, it reports which connection
type it discovered. The options are described in
Note: When you click Auto Detect while the WAN port already has a connection,
you might lose the connection because the VPN firewall will enter its
detection mode.
Table 2-1. Internet connection methods
Connection
Method
PPPoE
PPTP
DHCP (Dynamic IP) No data is required.
Fixed (Static) IP
If Auto Detect does not find a connection, you will be prompted to check the physical
connection between your VPN firewall and the cable or DSL line or to check your VPN
firewall's MAC address (see
3. Click WAN Status at the top right of the screen to verify WAN Port 1 connection status. Click
Connect if there is no connection.
Figure 2-2
2-4
Data Required
Login (Username, Password); Account Name, Domain Name
Login (Username, Password), Account Name, Local IP address, and PPTP
Server IP address;
Static IP address, Subnet, and Gateway IP; and related data supplied by your
ISP.
"Setting the VPN Firewall's MAC Address" on page
v1.0, January 2010
Table 2-1.
Connecting the VPN Firewall to the Internet
2-5).