Monitoring Vpn Firewall Statistics - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

Table 6-3. Router Status Fields (continued)
Item Description
WAN1 Configuration • WAN Mode: Single, Dual, or Rollover.
• WAN State: UP or DOWN.
• NAT: Enabled or Disabled.
• Connection Type: Static IP, DHCP, PPPoE, or PPTP.
• Connection State: Connected or Disconnected.
• WAN IP Address.: The IP address of the WAN interface.
• Subnet Mask: The IP subnet mask of the WAN interface.
• Gateway: The gateway IP address for the WAN interface.
• Primary DNS: The IP address of the primary DNS server for the WAN interface.
• Secondary DNS: The IP address of the secondary DNS server for the WAN
• MAC Address: The MAC address of the WAN interface.
WAN2 Configuration Displays the same details as for the WAN1 Configuration.

Monitoring VPN Firewall Statistics

To display the VPN firewall statistics:
1. Select Monitoring from the main menu and Router Status from the submenu. The Router
Status screen will display (see
2. Click the Show Statistics link in the upper right-hand section of the screen. The Router
Statistics screen will display.
Figure 6-15
For each interface, the number of transmitted and received packets, the number of collided
packets, the transmitted and received Bytes per second, and the interface up-time are shown.
VPN Firewall and Network Management
ProSafe VPN Firewall 200 FVX538 Reference Manual
interface.
Figure 6-14 on page
v1.0, January 2010
6-30).
6-31