ProSafe VPN Firewall 200 FVX538 Reference Manual
3. Click Apply.
LAN WAN Outbound Services Rules
You may define rules that will specify exceptions to the default rules. By adding custom rules, you
can block or allow access based on the service or application, source or destination IP addresses,
and time of day. The outbound rule will block the selected application from any internal IP LAN
address to any external WAN IP address according to the schedule created in the Schedule menu.
You can also tailor these rules to your specific needs (see
Note: This feature is for advanced administrators only! Incorrect configuration will cause
serious problems.
To create a new LAN WAN outbound service rule:
1. In the LAN WAN Rules screen, click Add under the Outbound Services table. The Add LAN
WAN Outbound Service screen will display...
Figure 4-3
2. Configure the parameters based on the descriptions in
4-10
"Administrator Tips" on page
Table 4-2 on page
Firewall Protection and Content Filtering
v1.0, January 2010
4-40).
4-3.