Specifying Quality Of Service (Qos) Priorities - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

ProSafe VPN Firewall 200 FVX538 Reference Manual
Modifying a Service
To edit the parameters of a service:
1. In the Custom Services Table, click the Edit icon adjacent to the service you want to edit. The
Edit Service screen will display.
Figure 4-18
2. Modify the parameters you wish to change.
3. Click Reset to cancel the changes and restore the previous settings or click Apply to confirm
your changes. The modified service will display in the Custom Services Table.

Specifying Quality of Service (QoS) Priorities

The Quality of Service (QoS) Priorities setting determines the priority of a service, which in turn,
determines the quality of that service for the traffic passing through the firewall. The user can
change this priority
• On the Services screen in the Custom Services Table for customized services (see
Figure 4-17).
• On the Add LAN WAN Outbound Services screen (see
• On the Add DMZ WAN Outbound Services screen (see
The QoS priority definition for a service determines the queue that is used for the traffic passing
through the VPN firewall. A priority is assigned to IP packets using this service. Priorities are
defined by the "Type of Service (ToS) in the Internet Protocol Suite" standards, RFC 1349.
4-26
Figure 4-3 on page
Figure 4-6 on page
Firewall Protection and Content Filtering
v1.0, January 2010
4-10).
4-13).