NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 117

You can set a Poll Interval (in seconds) to check the connection status of all active IKE policies to
obtain the latest VPN tunnel activity. The Active IPSec SA(s) table also lists current data for each
active IPsec SA (security association):
• Policy Name. The name of the VPN policy associated with this SA.
• Endpoint. The IP address on the remote VPN endpoint.
• Tx (KBytes). The amount of data transmitted over this SA.
• Tx (Packets). The number of packets transmitted over this SA.
• State. The current state of the SA. Phase 1 is "Authentication phase" and Phase 2 is "Key
Exchange phase".
Action. Allows you to terminate or build the SA (connection), if required.
To view VPN firewall VPN logs, select Monitoring from the main menu and VPN Logs from the
submenu. The VPN Logs screen will display.
Figure 5-19
Virtual Private Networking
ProSafe VPN Firewall 200 FVX538 Reference Manual
v1.0, January 2010
5-15