NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 142

ProSafe VPN Firewall 200 FVX538 Reference Manual
e. Select your Internet Interface adapter from the Name pull-down menu.
3. On the left-side of the menu, select Security Policy.
Enter the following information:
a. Under Security Policy, Phase 1 Negotiation Mode, check the Aggressive Mode radio
button.
b. Check the Enable Perfect Forward Secrecy (PFS) radio button, and select the Diffie-
Hellman Group 2 from the PFS Key Group pull-down menu.
c. Enable Replay Detection should be checked.
4. Click on Authentication (Phase 1) on the left-side of the menu and select Proposal 1.
Figure 5-37
Enter the Authentication values to match those in the VPN firewall ModeConfig Record
screen.
5-40
v1.0, January 2010
Virtual Private Networking