Configuring Multi Home Lan Ip Addresses - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

ProSafe VPN Firewall 200 FVX538 Reference Manual
To reserve an IP address, manually enter the device on the LAN Groups screen, specifying
Reserved (DHCP Client), as described in
8.
Note: The reserved address will not be assigned until the next time the PC contacts the
VPN firewall's DHCP server. Reboot the PC or access its IP configuration and
force a DHCP release and renew.

Configuring Multi Home LAN IP Addresses

If you have computers on your LAN using different IP address ranges (for example, 172.16.2.0 or
10.0.0.0), you can add "aliases" to the LAN port, giving computers on those networks access to the
Internet through the VPN firewall. This allows the VPN firewall to act as a gateway to additional
logical subnets on your LAN. You can assign the VPN firewall an IP address on each additional
logical subnet.
To add a secondary LAN IP address:
1. Select Network Configuration from the primary menu and LAN Settings from the submenu.
The LAN Setup screen will display.
2. Click the LAN Multi-homing tab. The LAN Multi-homing screen will display.
Figure 3-4
The Available Secondary LAN IPs table lists the secondary LAN IP addresses added to the
VPN firewall.
3-10
"Adding Devices to the Network Database" on page 3-
v1.0, January 2010
LAN Configuration