Configuring The Prosafe Vpn Client For Modeconfig - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

ProSafe VPN Firewall 200 FVX538 Reference Manual
Note: If RADIUS-PAP is selected, the VPN firewall will first check the User
Database to see if the user credentials are available. If the user account is not
present, the VPN firewall will then connect to the RADIUS server.
12. Click Apply. The new policy will appear in the List of IKE Policies table.

Configuring the ProSafe VPN Client for ModeConfig

From a client PC running NETGEAR ProSafe VPN Client software, configure the remote VPN
client connection.
To configure the client PC:
1. Right-click the VPN client icon in the Windows toolbar. In the upper left of the Policy Editor
window, click the New Policy editor icon.
Figure 5-35
Enter the following information:
a. Give the connection a descriptive name such as "modecfg_test" (this name will only be
used internally).
b. From the ID Type pull-down menu, select IP Subnet.
c. Enter the IP subnet and mask of the VPN firewall (this is the LAN network IP address of
the gateway).
5-38
v1.0, January 2010
Virtual Private Networking