Additional Wan Related Configuration - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

Prosafe vpn firewall 200
Hide thumbs Also See for FVX538v2 - ProSafe VPN Firewall Dual WAN:
Table of Contents

Advertisement

3. Edit the default information you want to change.
MTU Size. The normal MTU (Maximum Transmit Unit) value for most Ethernet
networks is 1500 Bytes, or 1492 Bytes for PPPoE connections. For some ISPs you may
have to reduce the MTU. But this is rarely required, and should not be done unless you are
sure it is necessary for your ISP connection.
Port Speed. In most cases, your VPN firewall can automatically determine the connection
speed of the Internet (WAN) port. If you cannot establish an Internet connection and the
Internet LED blinks continuously, you may have to manually select the port speed.
AutoSense is the default.
If you know that the Ethernet port on your broadband modem supports 100BaseT, select
100BaseT Half_Duplex; otherwise, select 10BaseT Half_Duplex. Use the half-duplex
settings unless you are sure you need full duplex.
Router's MAC Address. Each computer or router on your network has a unique 32-bit
local Ethernet address. This is also referred to as the computer's MAC (Media Access
Control) address. The default is Use Default Address. However, if your ISP requires
MAC authentication, then select either
Use this Computer's MAC address to enable the VPN firewall to use the MAC
address of the computer you are now using, or
Use This MAC Address to manually type in the MAC address that your ISP expects.
The format for the MAC address is XX:XX:XX:XX:XX:XX (numbers 0-9 and either
uppercase or lowercase letters A-F). If you select Use This MAC Address and then type
in a MAC address, your entry will be overwritten.

Additional WAN Related Configuration

If you want the ability to manage the VPN firewalll remotely, enable remote management at
this time (see
"Enabling Remote Management Access" on page
management, NETGEAR strongly recommends that you change your password (see
"Changing Passwords and Settings" on page
At this point, you can set up the traffic meter for each WAN, if desired. See
Traffic Meter" on page
Connecting the VPN Firewall to the Internet
ProSafe VPN Firewall 200 FVX538 Reference Manual
6-8).
6-27.
v1.0, January 2010
6-14). If you enable remote
"Enabling the
2-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fvx538

Table of Contents