Note: If you enable the DNS Relay feature, you will not use the VPN firewall as a DHCP
server but rather as a DHCP relay agent for a DHCP server somewhere else on
your network.
To configure the LAN Setup options:
1. Select Network Configuration from the primary menu and LAN Settings from the submenu.
The LAN Setup screen will display.
Figure 3-1
2. In the LAN TCP/IP Setup section, configure the following settings:
•
IP Address. The LAN address of your VPN firewall (factory default: 192.168.1.1).
LAN Configuration
ProSafe VPN Firewall 200 FVX538 Reference Manual
v1.0, January 2010
3-3