NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 143

5. Click on Key Exchange (Phase 2) on the left-side of the menu and select Proposal 1.
Figure 5-38
Enter the values to match your configuration of the VPN firewall ModeConfig Record menu.
(The SA Lifetime can be longer, such as 8 hours (28800 seconds).
6. Click the Save icon to save the Security Policy and close the VPN ProSafe VPN client.
Testing the Mode Config Connection
To test the connection:
1. Right-click on the VPN client icon in the Windows toolbar and select Connect. The
connection policy you configured will appear; in this case "My Connections\modecfg_test".
2. Click on the connection. Within 30 seconds the message "Successfully connected to
MyConnections/modecfg_test will display and the VPN client icon in the toolbar will read
"On".
3. From the client PC, ping a computer on the VPN firewall LAN.
Virtual Private Networking
ProSafe VPN Firewall 200 FVX538 Reference Manual
v1.0, January 2010
5-41