NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 230

ProSafe VPN Firewall 200 FVX538 Reference Manual
Table C-18. System Logs: Invalid Packets (continued)
Explanation
Recommended Action
Message
Explanation
Recommended Action
Message
Explanation
Recommended Action
Message
Explanation
Recommended Action
Message
Explanation
C-12
Bad Hardware Checksum for ICMP packets
1. Invalid packets are dropped.
2. Use this command to enable dropping and logging of the invalid packets:
fw/rules/attackChecks/configure dropInvalid 1
To allow invalid packet and disable logging:
fw/rules/attackChecks/configure dropInvalid 0
[INVALID][MALFORMED_PACKET][DROP] SRC=192.168.20.10
DST=192.168.20.2 PROTO=TCP SPT=23 DPT=54899
Malformed packet
1. Invalid packets are dropped.
2. Use this command to enable dropping and logging of the invalid packets:
fw/rules/attackChecks/configure dropInvalid 1
To allow invalid packet and disable logging:
fw/rules/attackChecks/configure dropInvalid 0
2007 Oct 1 00:44:17 [FVX538] [kernel]
[INVALID][SHORT_PACKET][DROP] SRC=192.168.20.10
DST=192.168.20.2 PROTO=TCP SPT=23 DPT=54899
Short packet
1. Invalid packets are dropped.
2. Use this command to enable dropping and logging of the invalid packets:
fw/rules/attackChecks/configure dropInvalid 1
To allow invalid packet and disable logging:
fw/rules/attackChecks/configure dropInvalid 0
[INVALID][ INVALID_STATE][DROP] SRC=192.168.20.10
DST=192.168.20.2 PROTO=TCP SPT=23 DPT=54899
Packet with Invalid State
1. Invalid packets are dropped.
2. Use this command to enable dropping and logging of the invalid packets:
fw/rules/attackChecks/configure dropInvalid 1
To allow invalid packet and disable logging:
fw/rules/attackChecks/configure dropInvalid 0
2007 Oct 1 00:44:17 [FVX538] [kernel]
[INVALID][REOPEN_CLOSE_CONN][DROP] SRC=192.168.20.10
DST=192.168.20.2 PROTO=TCP SPT=23 DPT=54899
Attempt to re-open/close session
v1.0, January 2010
System Logs and Error Messages