Configuring XAUTH for VPN Clients
Once the XAUTH has been enabled, you must establish user accounts on the local database to be
authenticated against XAUTH, or you must enable a RADIUS-CHAP or RADIUS-PAP server.
Note: If you are modifying an existing IKE policy to add XAUTH, if it is in use by a
VPN policy, the VPN policy must be disabled before you can modify the IKE
policy.
To enable and configure XAUTH:
1. Select VPN from the main menu and Policies from the submenu. The IKE Policies screen will
display.
Figure 5-27
2. You can add XAUTH to an existing IKE policy by clicking Edit adjacent to the policy to be
modified or you can create a new IKE policy incorporating XAUTH by clicking Add.
(Figure 5-28 on page 5-28
Virtual Private Networking
ProSafe VPN Firewall 200 FVX538 Reference Manual
shows the Add IKE Policy screen.)
v1.0, January 2010
5-27