NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 175

4. In the When limit is reached section, make the following choice:
• Block All Traffic. All access to and from the Internet will be blocked.
Warning: If the Block All Traffic radio button is selected, the WAN port shuts
• Block all traffic except E-mail. Only e-mail traffic will be allowed. All other traffic will
be blocked.
• Send E-mail alert. You must configure the e-mail capability in order for this function to
work (see "Activating Notification of Events and Alerts" on page
5. Click Apply to save your settings.
To configure the traffic meter for the WAN2 port, select the WAN2 Traffic Meter tab and repeat
this process
The Internet Traffic Statistics section of the screen displays statistics on Internet traffic through
the WAN port. If you have not enabled the traffic meter, these statistics are not available.
To display a report of Internet traffic by type, click the Traffic by Protocol link in the upper right-
hand section of the Traffic Meter screen . The volume of traffic for each protocol will be displayed
in a popup window. Traffic counters are updated in MBytes scale; the counter starts only when
traffic passed is at least 1MB.
Figure 6-13
VPN Firewall and Network Management
ProSafe VPN Firewall 200 FVX538 Reference Manual
down once its traffic limit is reached
v1.0, January 2010
6-23).
6-29