NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 138

ProSafe VPN Firewall 200 FVX538 Reference Manual
2. Click Add to configure a new IKE Policy. The Add IKE Policy screen will display.
Figure 5-34
3. In the Mode Config Record section, enable Mode Config by checking the Yes radio box and
selecting the Mode Config record you just created from the pull-down menu. (You can view
the parameters of the selected record by clicking the view selected button.)
Mode Config works only in Aggressive Mode, and Aggressive Mode requires that both ends
of the tunnel be defined by a FQDN.
5-36
v1.0, January 2010
Virtual Private Networking