Quick Vpn Status - Cisco WS-CE500 Administration Manual

Status
VPN Status
Cisco SA500 Series Security Appliances Administration Guide
Poll Interval
Start
Stop

Quick VPN Status

This page displays the status of QuickVPN connections and allows you to DROP
any existing active (ONLINE) connections.
Status > VPN Status > Quick VPN Status
User Name
Remote IP
Status
Action
Poll Interval
Start
Stop
Enter a value in seconds for the poll interval. To
modify the poll interval, click the Stop button and
then click Start to restart the automatic refresh
using the specified poll interval.
Click to enable the automatic page refresh feature.
Click Stop to disable the automatic page refresh
feature.
Name of the IPsec User associated with the
QuickVPN tunnel.
Displays the IP address of the remote QuickVPN
client. This could be NAT/Public IP if the client is
behind the NAT router.
Displays the current status of the QuickVPN client.
OFFLINE means that the QuickVPN tunnel is NOT
initiated/established by the IPsec user. ONLINE
means that QuickVPN Tunnel, initiated/established
by the IPsec user, is active.
Click Drop to terminate an active/ONLINE
connection and hence to change the status of
QuickVPN client to OFFLINE.
Time in seconds, after which the page will
automatically reload.To modify the poll interval
click the Stop button and use Start to restart
automatic refresh.
Click to enable automatic page refresh feature.
Click Stop to disable the automatic page refresh
feature.
10
212