Table of Contents
Advertisement
Using the VPN 3002 Hardware Client Manager for
Quick Configuration
This chapter tells you how to complete quick configuration of the system using the VPN 3002 Hardware
Client Manager.
The VPN 3002 Hardware Client Manager is an HTML-based configuration, administration, and
monitoring system built into the VPN 3002. To use it, you need only connect to the VPN 3002 using a
PC and browser on the same private network as the VPN 3002.
As you proceed, refer to the data you recorded in Table 2-2.
The figures that follow show only the main frame of the Manager window. To use features in the other
frames, see the "Understanding the VPN 3002 Hardware Client Manager Window" section.
Logging into the VPN 3002 Hardware Client Manager
Access and log into the VPN 3002 Hardware Client Manager using these steps:
Start the browser. See the "Browser Requirements" section. We recommend using Microsoft Internet
Step 1
Explorer for best results. Maximize the browser window for easiest reading.
With the browser, connect to the IP address of the VPN 3002 on your private interface. Enter the IP
Step 2
address (for example, 192.168.10.1) in the Address or Location field. The browser displays the login
screen.
The Manager displays the VPN 3002 Hardware Client Manager Loginscreen.
OL-2854-01
C H A P T E R
VPN 3002 Hardware Client Getting Started
3
3-1
Advertisement
Table of Contents
