Cisco WS-CE500 Administration Manual page 106

Firewall Configuration
Configuring Firewall Rules to Control Inbound and Outbound Traffic
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco SA500 Series Security Appliances Administration Guide
Click Firewall > Firewall > Schedules, or from the Getting Started (Advanced)
page, under Firewall and NAT Rules, click Configure Schedules (Optional).
The Firewall Schedules window opens. Any existing schedules appear in the List
of Available Schedules table.
To create a new schedule, click Add.
Other options: Click the Edit button to edit an entry. To delete an entry, check the
box and then click Delete. To select all entries, check the box in the first column of
the table heading. To select all entries, check the box in the first column of the
table heading.
After you click Add or Edit, the Schedules window opens.
Enter the following information:
• Schedule Name: Enter a name for the schedule. The name will appear in the
Select Schedule drop-down list on the Firewall Rule Configuration page.
• Scheduled Days: From the drop-down list, choose All Days or Specific
Days. If you choose Specific Days, also check the days for this schedule.
• Schedule Time of Day: From the drop-down list, choose All Day or Specific
Times. If you choose Specific Times, also enter the Start Time and the End
Time by entering the hour, minute, and AM or PM.
Click Apply to save your settings.
If you are using the Getting Started (Advanced) page, click Getting Started >
Advanced to continue with the list of configuration tasks under Firewall and NAT
Rules.
Configuring IP Aliases for WAN interfaces
IP aliases are useful when you have additional public IP address provided by your
ISP and you want to these addresses to reach devices on your local network.
Click Networking > WAN > IP Alias.
To add IP Aliases, click Add.
Choose the WAN interface from the Interface drop-down menu. This is the
interface where you will add the IP address to.
4
106