Dhcp Reserved Ips - Cisco WS-CE500 Administration Manual

Networking
Configuring the LAN
STEP 6
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SA500 Series Security Appliances Administration Guide
This feature is particularly useful in Auto Rollover mode. For example, if the DNS
servers for each connection are different, then a link failure may render the DNS
servers inaccessible. However, when the DNS proxy is enabled, then clients can
make requests to the router and the router, in turn, sends those requests to the
DNS servers of the active connection. You also can enable the IGMP proxy on the
respective LAN.
Click Apply to save your settings.

DHCP Reserved IPs

Even when the security appliance is configured to act as a DHCP server, you can
reserve certain IP addresses always to be assigned to specified devices. To do
so, add the MAC address of the device, along with the desired IP address, to the
list of DHCP Reserved IPs. Whenever the LAN DHCP server receives a request
from a device, the hardware address is compared with the database. If the device
is found, then the reserved IP address is used. Otherwise, an IP address is
assigned automatically from the DHCP pool.
The reserved IPs need to be outside the pool of the DHCP addresses that the DHCP
server assigns dynamically.
Click Networking > LAN > DHCP Reserved IPs, or from the Getting Started
(Basic) page, under WAN & LAN Connectivity, click DHCP Reserved IPs
(Optional).
The DHCP Reserved IPs (LAN) window opens. Any existing reserved IPs are listed
in the Available DHCP Assigned IPs (LAN) table.
To add a reserved IP address, click Add. The DHCP Reserved IP for LAN window
opens.
Other options: Click the Edit button to edit an entry. To delete an entry, check the
box and then click Delete. To select all entries in the table, check the box at the left
side of the heading row.
Enter the IP address and the MAC address of the device that you want to add.
Each reserved IP address should be outside the configured DHCP pool addresses.
Click Apply to save your settings.
2
52