Cisco WS-CE500 Administration Manual page 206

Status
Device Status
Cisco SA500 Series Security Appliances Administration Guide
LAN Interface
IP Address
DHCP Mode:
WAN Interface
IP Address
State
Optional Port (WAN/DMZ/LAN)
IP address
State
Access Points
Site to Site VPN
All Tunnels
Remote Access VPN
SSL Users
IPsec Users
LAN IP address of the router,.
Displays the router's DHCP server mode. The
mode can be Disabled, Server, or Relay.
IP address for the primary (dedicated) WAN port.
Indicates if the WAN connection is UP or DOWN.
State will be UP if the link is up and the WAN
interface has an IP.
IP address of the Optional Port. When the Optional
Port is in LAN mode, this field will not be displayed.
Indicates if the connection is UP or DOWN. When
the Optional Port is in LAN or DMZ mode, this field
is not displayed. In WAN mode, the state will be UP
if the link is up and the WAN interface has an IP.
(only applies to SA 520W)
Shows how many access points are configured on
the SA 520W and how many users are associated
with each SSID.
Number of active Site-to-Site VPN tunnels and the
total number of configured Site-to-Site VPN
tunnels.
Number of active SSL users.
Number of IPsec users.
10
206