Table of Contents
Advertisement
Status
CDP Neighbor
CDP Neighbor
Cisco SA500 Series Security Appliances Administration Guide
Remote Logging Configuration page. For more information, see
Logging, page 188
IPsec VPN Logs
Use this page to view the log contents generated by all IPsec VPN policies. The
logs are generated automatically and need not be enabled explicitly. This page
shows the status of the recent IPsec VPN activity.
Status > View Logs > IPsec VPN Logs
•
Click Refresh Logs to see the entries added after the page was opened.
•
Click Clear Logs to delete all entries in the log window.
ProtectLink Logs
Use this page to displays the logs for ProtectLink services events.
Status > View Logs > ProtectLink Logs
•
Click Clear Logs to delete all entries in the log window
•
Click Refresh Logs to view the entries added after the page was opened.
•
Click Send Logs to e-mail the log messages currently displayed in the log
window. Ensure that the e-mail address and server information are
configured on the Firewall Logs & E-mail page (under Administration menu)
before clicking Send Log.
The Cisco Discovery Protocol (CDP) provides information about other devices that
are connected to this device and that support the CDP protocol. The page
displays information specific to the device and identifies the network interface of
this device on which the neighbor was discovered. For more information about
CDP Global Configuration, see
Status > CDP Neighbor
Device Id
Displays the device identifier advertised by the neighbor
Local Port
Interface on which the neighbor was discovered.
CDP, page
199.
10
Remote
215
Hide quick links:
Advertisement
Table of Contents
