Ssl Vpn Status - Cisco WS-CE500 Administration Manual

Sa500 series small business security appliances
Table of Contents

Advertisement

Status
VPN Status
Cisco SA500 Series Security Appliances Administration Guide

SSL VPN Status

This page displays the current statistics for the SSL VPN Tunnel connections. You
can use the buttons on the page to either start or stop connections.
Status > VPN Status > SSL VPN Status
User Name
IP Address
Tunnel Specific Fields
Local ppp interface
Peer PPP Interface IP
Tx Packets
Tx Dropped Packets
Tx Bytes (KB)
Rx Packets
Rx Dropped Packets
Rx Bytes (KB)
Connection Status
Username of the logged in user.
Internet IP address from where tunnel
establishment was initiated.
Name of ppp interface on the router associated to
sslvpn tunnel.
IP address assigned to ppp interface at the remote
client side from where the tunnel is established.
Number of packets associated with the tunnel
transferred by the remote client.
Number of packets associated with the tunnel
dropped while transfering, by the remote client.
Total volume of sent traffic (in Kilobytes) associated
with the tunnel.
Number of packets associated with the tunnel
received by the remote client.
Number of packets associated with the tunnel
dropped while receiving, by the remote client.
Total volume of received traffic (in Kilobytes)
associated with the tunnel.
Click Disconnect to terminate an active user's
session and hence the associated SSLVPN-
Tunnel(if any).
NOTE
If the tunnel is not established by the user, the
tunnel specific fields will have no values.
10
211

Advertisement

Table of Contents
loading

Table of Contents