Getting Started With The Configuration Utility - Cisco WS-CE500 Administration Manual

Getting Started

Getting Started with the Configuration Utility

STEP 5
STEP 6
STEP 7
Getting Started with the Configuration Utility
Cisco SA500 Series Security Appliances Administration Guide
If you are using a UC500, connect an Ethernet network cable from the WAN port of
the UC500 to an available LAN port of the security appliance.
Power on the security appliance.
Power on the connected devices. Each LED lights to show an active connection.
A sample configuration is illustrated below.
Congratulations! The installation of the security appliance is complete.
The Configuration Utility web page is a web based device manager that is used to
provision the SA500 Series Security Appliances. To use this utility, you must be
able to connect to the SA500 Series Security Appliances from your administration
PC or laptop. You can access the security appliance by using any web browser
(such as Microsoft Internet Explorer or Mozilla Firefox).
1
17