Vpn Status; Ipsec Vpn Status - Cisco WS-CE500 Administration Manual

Status

VPN Status

VPN Status
Cisco SA500 Series Security Appliances Administration Guide
Poll Interval

IPsec VPN Status

Use this page to view current statistics for the IPsec connections. You can use
buttons on the page to start or stop a connection. The page also refreshes
automatically to display the most current status for an SA.
Status > VPN Status > IPsec Status
Policy Name
Endpoint
Tx (KB)
Tx (Packets)
State
Action
Enter a value in seconds for the poll interval. To
modify the poll interval, click the Stop button and
then click Start to restart the automatic refresh
using the specified poll interval.
Name of the IKE or VPN policy.
Displays the IP address of the remote VPN
gateway or client.
Data transmitted in Kilobytes.
Number of IP packets transmitted.
Displays the current status for IKE policies. The
status can be either Not Connected or IPsec SA
Established.
Click Connect to establish an inactive SA
(connection) or Drop to terminate an active SA
(connection).
When a VPN policy is in place and is enabled, a
connection is triggered by any traffic that matches
the policy, and the VPN tunnel is set up
automatically. However, you can use the Connect/
Disconnect button to manually connect or
disconnect the VPN tunnel.
10
210