Adding Or Editing User Login Policies - Cisco WS-CE500 Administration Manual

Administration
Users
STEP 4
STEP 1
STEP 2
Cisco SA500 Series Security Appliances Administration Guide
Click Apply to save your settings.

Adding or Editing User Login Policies

To add or edit user login policies, click Administration > Users > Users.
The Users window opens.
You cannot configure these settings for the system default users, only for the users
that you add.
Proceed as needed, based on the type of policy:
• User Login Policy: Click the first button in the Edit User Policies column.
When the User Login Policies window opens, enter the following information:
- Disable Login: Check this box to disable the account, or uncheck this
box to enable the account. This setting cannot be changed for the
default admin account.
- Deny Login from WAN Interface: Check this box to prevent the user
from logging in from the WAN, or uncheck this box to allow the user to
log in from the WAN. This setting cannot be changed for the default
admin account.
• User Login Policy By Browser: Click the second button in the Edit User
Policies column. When the User Policy By Client Browser window opens,
enter the following information:
- In the User Policy By Client Browser area, choose whether to Deny
Login from Defined Browsers or to Allow Login only from Defined
Browsers.
- To add a browser, click Add, choose the browser, and then click Apply.
- To delete a browser, check the box, and then click Delete.
• User Login Policy By IP Address: Click the third button in the Edit User
Policies column. When the User Policy By Source IP Address window opens,
enter the following information:
- In the User Policy By Source IP Address area, choose whether to Deny
Login from Defined Addresses or to Allow Login only from Defined
Addresses.
8
175