Table 1-5 Attributes Of The Ge Electrical Interfaces; Table 1-6 Attributes Of The Ge Optical Interfaces - H3C SECPATH F1000-A,SECPATH F1000-A HOST Installation Manual

Installation Manual
H3C SecPath F1000-A Firewall
III. Gigabit Ethernet (GE) Interface
On the H3C SecPath F1000-A, the SRPU board provides two 10/100/1000 Mbps
Ethernet interfaces: Ethernet 0 (right) and Ethernet 1 (left), each as optical or electric
interface. The electric interface uses the RJ-45 connector and the optical interface uses
the Small Form-Factor Pluggable (SFP) connector.
Five 1000Base-FX SFP optical transceiver options are available for the H3C SecPath
F1000-A: multi-mode short-haul (850 nm), single mode medium-haul (1310 nm), single
mode long-haul (1310 nm), single mode long-haul (1550 nm), and single mode
ultra-long haul (1550 nm). They all provide LC interfaces and are hot swappable.
The following table shows the Ethernet interface attributes of the H3C SecPath
F1000-A:

Table 1-5 Attributes of the GE electrical interfaces

Connector
Interface type
Frame format
Operating mode

Table 1-6 Attributes of the GE optical interfaces

Attribute
Connector
Optical fiber
Max
transmission
distance
Attribute
Multi-mo Single
de mode
short-ha medium-ha
ul (850 ul (1310
nm) nm)
SFP/LC
62.5/125
9/125μm
μm
single-mod
multi-mod
e fiber
e fiber
0.55 km 10 km (6.21
(0.34 mi) mi)
1-5
Chapter 1 Product Overview
Description
RJ-45
auto-MDI/MDIX
Ethernet_II
Ethernet_SNAP
10/100/1000 Mbps auto-sensing
Full duplex/Half-duplex
(1000 Mbps and half-duplex cannot be
used at the same time)
Description
Single Single
mode mode
short-haul long-haul
(1310 nm) (1550 nm)
9/125μm 9/125μm
single-mod single-mod
e fiber e fiber
40 km 40 km
(24.86 mi) (24.86 mi)
Single
mode
ultra-long
haul (1550
nm)
9/125μm
single-mod
e fiber
70 km
(43.5 mi)