Uploading/Downloading A Program/File Using Ftp; Figure 5-3 Set Up An Environment For Local Uploading/Downloading Using Ftp - H3C SECPATH F1000-A,SECPATH F1000-A HOST Installation Manual

Installation Manual
H3C SecPath F1000-A Firewall

5.1.5 Uploading/Downloading a Program/File Using FTP

The H3C SecPath Series Firewalls can act as the FTP server. Any FTP clients (local or
remote) connected to the firewall can update configuration files or upgrade
application/Boot ROM programs using FTP. A user can upload/download configuration
files and application programs after passing the authentication. The following
subsections describe the procedures.
Note:
Upload is to transfer files from an FTP client to the firewall, that is, the put operation.
Download is to transfer files from the firewall to an FTP client, that is, the get operation.
I. Setting up an uploading/downloading environment
Set up a local uploading/downloading environment using FTP
10.110.10.13/24
P C
(FTP Client)

Figure 5-3 Set up an environment for local uploading/downloading using FTP

Step 1: Connect the PC to an Ethernet interface on the firewall.
Step 2: Assign an IP address, 10.110.10.10 for example, to the Ethernet interface on
the firewall.
Step 3: Assign an IP address, 10.110.10.13 for example, to the Ethernet interface on
the PC.
Step 4: Copy the application program/Boot ROM/configuration file to a directory, "C:\
version" for example.
H3C SecPath F1000-A (FTP Server )
LAN
5-9
Chapter 5 Software Maintenance
Ethe rnet interface
10. 110.10.10/24