H3C SECPATH F1000-A,SECPATH F1000-A HOST Installation Manual page 17

Installation Manual
H3C SecPath F1000-A Firewall
Attribute
Central
wavelength
Transmi
tter
optical
power
Receiver
sensitivity
Operating
mode
Frame format
Note:
When using optical transceivers, select those that have been approved by our
company.
Before performing switchover between electrical/optical interfaces, you need to first
disable the rate and duplex mode configurations in the current mode (electrical or
optical), and then configure the interface after the switchover.
1.2.5 MIM
The H3C SecPath F1000-A provides one extended MIM slot where one of the following
MIMs can be installed:
1-port 10Base-T/100Base-TX Fast Ethernet interface module (1FE)
2-port 10Base-T/100Base-TX Fast Ethernet interface module (2FE)
4-port 10Base-T/100Base-TX Fast Ethernet interface module (4FE)
1-port 10Base-T/100Base-T/1000Base-TX Ethernet interface module (1GBE)
2-port 10Base-T/100Base-T/1000Base-TX Ethernet interface module (2GBE)
1-port 1000Base-LX/1000Base-SX optical interface module (1GEF)
2-port 1000Base-LX/1000Base-SX optical interface module (2GEF)
Security socket layer encryption module (SSL)
For more information on the MIMs, see Chapter 8 "Multifunctional Interface Module".
Multi-mo
de
short-ha medium-ha
ul (850 ul (1310
nm)
850 nm 1310 nm
Min -9.5 dBm -9 dBm
Max 0 dBm -3 dBm
-17 dBm -20 dBm
1000 Mbps
Full duplex
Ethernet_II
Ethernet_SNAP
Description
Single
Single
mode
mode
short-haul
(1310 nm)
nm)
1310 nm
-2 dBm
5 dBm
-23 dBm
1-6
Chapter 1 Product Overview
Single
Single
mode
mode
ultra-long
long-haul
haul (1550
(1550 nm)
nm)
1550 nm 1550 nm
-4 dBm -4 dBm
1 dBm 2 dBm
-21 dBm -22 dBm