Transmitter Displays And Buttons - FUTABA 9 CHP SUPER Instruction Manual

TRANSMITTER DISPLAYS & BUTTONS
When you first turn on your transmitter, a confirmation double beep sounds, and the screen shown below appears. Before
flying, or even starting the engine, be sure that the model type and name appearing on the display matches the model that
you are about to fly! If you are in the wrong model memory, servos may be reversed, and travels and trims will be wrong,
leading to an immediate crash.
Edit buttons and Start-up Screen (appears when system is first turned on):
Model number
and name
Timers
Throttle/Elevator trim
display
Rudder trim
Mode End
display
key key
M /P B : (key)
ODE AGE UTTON
Press and hold M
BASIC and ADVANCE menus. HELI only: Press M
E B : (key)
ND UTTON
Press E B
ND UTTON
S /C B
ELECT URSOR UTTONS
Press S
ELECT
Press S
ELECT
Turn Dial:
Turn D clockwise or counterclockwise to quickly scroll through functions within each menu.
IAL
Turn D clockwise or counterclockwise to scroll through choices within an option of a function (for example, to
IAL
select which switch controls dual/triple rates).
Press Dial:
Press D
to select the actual function you wish to edit from the menu.
IAL
Press D and hold one second to confirm major decisions, such as the decision to: select a different model from
IAL
memory, copy one model memory over another, trim reset, store channel position in FailSafe, change model type,
reset entire model. System will ask if you are sure.
MIX: Mixer Alert
Pac: CAMPac display (9Csuper data)
T9C: CAMPac display (9C data)
Modulation indicator
Battery voltage
Aileron trim
display
B for one second to open programming menus. Press M
ODE UTTON
to return to previous screen. Closes functions back to menus, closes menus to start-up screen.
: (key)
/C B to scroll through and select the option to edit within a function.
URSOR UTTONS
to page up/page down within BASIC or ADVANCE menu.
/C B
URSOR UTTONS
(PCM shown)
Elevator/Throttle trim
display
Total timer display <TIMER>
Shows the cumulated ON time. (hours:minutes)
Up/down timer display <S1.S2>
(minutes:seconds)
Model timer display <S3>
Shows the cumulated ON time for each model.(hours:minutes)
Resetting timers:
Select the desired timer with Select key. The timer display
flashes. To reset the timer, press Dial for one second.
Select Dial
keys
B to scroll between conditions in certain functions.
ODE UTTON
Press D
IAL
18
B
ODE UTTON
again to accept change.
to switch between